Section outline

    • Checklist
      Students must
      Mark as done
    • Heat Generation in Flat Plate with Variable Thermal Conductivity Page
      ME-2022-S2-63
      Consider steady state, one-dimensional heat conduction in an infinite slab of thickness \(2L\) (\(L\) = 1 m) as shown in the figure.

      The thermal conductivity (\(k\)) of the material varies with temperature as \(k=cT\), where \(T\) is the temperature in K, and \(c\) is a constant equal to 2 W/(m.K2). There is a uniform heat generation of 1280 kW/m3 in the slab. If both faces of the slab are maintained at 600 K, then the temperature at \(x=0\) is _____ K (in integer).
      Not available unless: You are a(n) Student
    • Temperature Distribution in Heat Generating Slab Page
      Not available unless: You are a(n) Student
    • Heat Generation in Cylindrical Rod Page
      Not available unless: You are a(n) Student
    • Heat Flow from Heat Generating Rod Page
      Not available unless: You are a(n) Student
    • Temperature Distribution in Cylindrical Pipe with Heat Generation Page
      Not available unless: You are a(n) Student
    • Heat Generation in Flat Wall with One Side Insulated Page
      Not available unless: You are a(n) Student
    • Temperature Difference for the Rod with Heat Generation Page
      Not available unless: You are a(n) Student
    • Surface Temperature of Heat Generating Uranium Rod Page
      Not available unless: You are a(n) Student