Conduction - Part-2
Section outline
-
Heat Generation, Unsteady Conduction, Fins
-
Heat Generation in Flat Plate with Variable Thermal Conductivity PageME-2022-S2-63Consider steady state, one-dimensional heat conduction in an infinite slab of thickness \(2L\) (\(L\) = 1 m) as shown in the figure.
The thermal conductivity (\(k\)) of the material varies with temperature as \(k=cT\), where \(T\) is the temperature in K, and \(c\) is a constant equal to 2 W/(m.K2). There is a uniform heat generation of 1280 kW/m3 in the slab. If both faces of the slab are maintained at 600 K, then the temperature at \(x=0\) is _____ K (in integer).
-
Temperature Distribution in Heat Generating Slab Page
-
Heat Generation in Cylindrical Rod Page
-
Heat Flow from Heat Generating Rod Page
-
Temperature Distribution in Cylindrical Pipe with Heat Generation Page
-
Heat Generation in Flat Wall with One Side Insulated Page
-
Temperature Difference for the Rod with Heat Generation Page
-
Surface Temperature of Heat Generating Uranium Rod Page
-
Three-dimensional Heat Conduction Equation Page
-
k and q from Steady-state Temperature Distribution Page
-
Unsteady Heating of Steel Shaft Page
-
Cooling of Hot Brass Balls in Water Bath Page
-
Cooling of Electronic Device with Heat Sink Page
-
Heat Loss from Fin Page
-
Thermal Conductivity Measurement using Fin Formula Page
-
Efficiency of Fin with Adiabatic Tip Page
-
Length of Fin from Fin Efficiency and Effectiveness Data Page
-