Process Control - Video Lectures
Topic outline
-
-
-
Level Control Page
-
-
Block Diagram Reduction - Examples PageCoughanowr3E-11-1Determine the transfer function \(Y(s)/X(s)\) for the block diagrams shown in figure. Express the results in terms of \(G_a, G_b\), and \(G_c\).
Enrol me in this course -
Block Diagram Reduction - with Inner Forward Loop Page
-
Block Diagram Reduction - with Inner Feedback Loop Page
-
Block Diagram Reduction - with Inner Loop and Load Page
-
-
Block Diagram Reduction - Additional Example Page
-
Process Gain from Closed Loop Response PageIN-2020-37The system shown in Fig.(a) has a time response \(y(t)\) to an input \(r(t) = 10u(t)\) as shown in Fig.(b), u(t) being the unit step input. Both \(K, \tau\) are positive.
The gain \(K\) of the system is _______
Enrol me in this course -
Damping Ratio and & Natural Frequency of Closed Loop System Page
-
Addition of Integral Action to Closed Loop Page
-
Closed Loop Transfer Function & Offset Page
-
Steady State Error for Step Change in Input Page
-
Comparison of Closed Loops with Positive or Negative Feedbacks Page
-
Comparison of Overshoot of Closed Loops Page
-
Block Diagram Reduction with Multiple Inputs and Outputs Page
-
Steady State Error of Closed Loop Page
-
Ultimate Values of Controller and Plant Page
-
Level Control with PI Controller Page
-
Reducing the Time Constant of Closed Loop Page
-
Control of Surge Drum with Proportional Controller Page
-
Closed Loop System with Two Equal Poles Page
-
Parameter of Controller for Closed Loop with Specified Poles Page
-
Damped Natural Frequency of Closed Loop Page
-
Controller Gain for Decaying Oscillations with Closed Loop Page
-